[MTD]

The tops of the head light housings have 3 distinct holes for adjustment. 2 for up/down and 1 for left/right.

Only 1 set of the holes has what appears to be an adjusting screw. the other 2 holes appear to have nothing in them.

Am I blind, dumb or just messing something?

 

[MTD]

Anyone?

Flexin5 Im sure you have looked at the lights.

 

[Ctvader]

I noticed the same thing - mine seem too law as they shine under the bumper on the car in front of me. I went to adjust them this morning and there seems to only be an adjusting screw on the high beams.

 

[Ctvader]

I had another look at the instructions and I think there is only one screw to adjust on either headlight. It seems misleading since the plastic cover has 3 holes...

 

[MTD]

Actually now that the days are getting longer, I keep meaning to look into this again. It might be a job for the dealer.

 

[andre12dbsi]

I havent looked into this either but after driving in the dark more often it does seem that they are aimed a little low.

 

[konwakr]

Trying to adjust the headlights up a little, they seem to be aimed a bit low. Has anyone figured this out yet?

 

[andre12dbsi]

You can adjust them. You just need a really long screwdriver to reach the thread.


Sent from my iPhone using Tapatalk

 

[domahmegok]

Trying to adjust the headlights up a little, they seem to be aimed a bit low. Has anyone figured this out yet?

I just did this yesterday, it is the hole closest to the middle and makes a huge difference now that my commute is dark in the morn and night.

 

[Gonzo]

Why type of tool, flat head, phillips head, hex?

 

[andre12dbsi]

It's a Phillips head.


Sent from my iPhone using Tapatalk

 

[MrCar]

I had my dealer do an adjust. Raised slightly, increased width as well (not much spill to the sides with these lights), made a bit of a difference. They told me there wasn't much adjustment they could do.